Home > PLUMBING > KITCHEN & BATH > DRAIN & SUPPLY
Choose a sub category:
SUPPLY LINES SUPPLYADAPTERS & CONNECTORS ICEMAKER SUPPLY LINES
TUBULAR DRAIN - PLASTIC TUBULAR DRAIN - METAL FLOOR DRAINS AND TRAPS
Sort By:
1 2 3 ... 11
Plumb Pak PP20552 Extension Tube Plumb Pak PP20944 Extension Tube Plumb Pak PP20999 Drain Pipe Adapter
Plumb Pak Extension Tube, 1-1/2 in Dia X 6 in Length, Slip Joint, PVC, White Plumb Pak Extension Tube, 1-1/4 in Dia X 6 in Length, Slip Joint, PVC, White Plumb Pak Drain Pipe Adapter, 1-1/2 in Nominal, Solvent Weld X Compression End, Plastic, White
Plumb Pak PP20554 Sink Drain Coupling TAILPIECE FLANGE 1-1/2ODX4 WHT ROD CLIP POP-UP BATHROOM
With 1-1/2" x 1-1/4" reducing washers. Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers. Metal construction. Includes one small hole clevis clip and one large clevis clip. Fits most sinks.
Plumb Pak PP205512 Extension Tube Plumb Pak PP20668 Master End Outlet Tee and Tailpiece With Baffle TAILPIECE FLANGE 1-1/2ODX6 WHT
Plumb Pak Extension Tube, 1-1/2 in Dia X 12 in Length, Slip Joint, Plastic, White Plumb Pak Master End Outlet Tee and Tailpiece, 1-1/2 in Nominal, Slip/Direct End, Plastic, White Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers.
Plumb Pak PP20664 Master Dishwasher Tailpiece Plumb Pak PP20905 Sink Tailpiece Plumb Pak PP20945 Extension Tube
For use with hose or clamp. Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 6 in Length, Flanged, PVC, White Plumb Pak Extension Tube, 1-1/4 in Dia X 12 in Length, Slip Joint, PVC, White
Oatey 43560 Snap-In Drain Oatey 42757 Condensate P-Trap TEE CENTER OUTLET 1-1/2IN WHT
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. One-piece design. Made from 3/4" PVC Schedule 40 DWV pipe. Fits slip joint tubes. Includes center outlet with two nuts and washers. 1-1/2" diameter.
TUBE EXTEN SLIP 1-1/2X6IN WHT Worldwide Sourcing DWC-100 Dishwasher Connector Plumb Pak PP20946 J-Bend
For kitchen and bathroom sink drains. Connects to either plastic or metal inlets. Connects dishwasher drain hose to sink drain or to a garbage disposal. Made of flexible PVC. For P or S traps.
Plumb Pak PP20558 Reducer Coupling Plumb Pak PP905W Sink Tailpiece Oatey 42021 Replacement Round Snap-Tite Strainer
1-1/2" slip joint x 1-1/4" solvent weld. Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 6 in Length, Flanged, PVC, White, For Kitchen Use 6-3/4" white plastic replacement strainer. Screws included.Carded.
P-TRAP SLIP JOINT 1-1/2IN WHT TRAP ADAPTER 1-1/2IN WHITE    Oatey 42758 Condensate Running Trap
For kitchen and bathroom sink drains. Includes P-trap with two nuts. Fits slip joint tubes. Includes trap adapter with on nut and washer. 1-1/2" diameter. One-piece design. Made from 3/4" PVC Schedule 40 DWV pipe
Plumb Pak PP20555 Sink Drain Pipe Elbow With Reducing Washer Plumb Pak PP20557 Drain Pipe Elbow With Reducing Washer Plumb Pak PP20661 J-Bend
1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer. 1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer. For P or S traps.
Plumb Pak PP20949 Wall Tube J-BEND TRAP SLIP 1-1/2IN WHIT TAILPIECE FLANG 1-1/2ODX12 WHT
Plumb Pak Wall Tube, 1-1/2 in Nominal, Plastic, White For kitchen and bathroom sink drains. 1-1/2"  or 1-1/4" inlet. Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers.
   
 
1 2 3 ... 11